What Home Inspectors Look For During Basement Inspections

When buying or selling a home in the Calgary and its surrounding neighbourhoods, the basement is often a main feature in the story of the property. As our local climate swings from -30 degrees Celsius to sudden warm Chinook winds, foundations and basements endure an incredible amount of environmental stress.

Part of our PROspections philosophy is the belief that home inspections should never be a confusing list of technical jargon. Our goal is to give you a professional, clear, and under to understand breakdown of the property from top to bottom. Whether you are a buyer looking for peace of mind or a seller wanting to avoid any last minute surprises, knowing what happens during the basement portion of a home inspection is key to making a confident, informed decision.

Components of a Basement Inspection

1. Structural Integrity & Foundation Health: The foundation is the bedrock of the property. Calgary has clay-heavy soil that can act like a sponge, as it expands rapidly when wet and shrinks dramatically during dry spells. This constant shifting can place immense hydrostatic pressure on concrete walls.

      During a basement inspection, we look closely for clues that tell us how the foundation is handling this pressure. We are looking for signs, such as:

      • Crack Patterns: Not all cracks spell disaster or red flags. Minor hairline fractures often happen naturally as concrete cures. However, horizontal cracks, stair-step cracks in concrete blocks, or vertical cracks wider than 1.5 millimeters (roughly the thickness of a credit card) may indicate active shifting.
      • Bowing or Leaning Walls: We will visually inspect along the plane of the walls to see if the soil outside if pushing the concrete inwards.
      • Support Columns and Beams: We examine the main wood or steel posts, teleposts (which are adjustable steel columns) to ensure that they appear to be perfectly straight and properly supporting the main floor joists and sitting on solid footing.

      2. Water Management & Moisture Intrusion: Water can sometimes be a homeowner’s adversary, especially during our rapid spring snowmelt or heavy summer rainstorms. Given that properties in Calgary have basements buried in heavy clay, any water pooling next to or near the exterior walls can find its way into the space.

      During a basement inspection, we look for signs of moisture in the basement, including:

      • Efflorescence: This is a white, powdery, chalky residue left behind on concrete walls. Efflorescence occurs when water seeps through the wall, evaporates, and leaves its natural mineral salts behind. This is a likely sign of moisture movement and may require further attention.
      • Staining & Mould: We visually inspect the drywall for dark stains or damp spots. Calgary’s sharp temperature swings can make basements prime real estate for mould if humidity is not properly managed.
      • The Sump Pump Review: If a property has a sump pump, we inspect the sump pump system to ensure that it triggers correctly and carries water away from the home. It is necessary to note any sump pump concerns as this can potentially cause significant damage during a heavy rainfall or storm.

      3. HVAC & Mechanical Systems: For most Calgary homes, the basement serves as an engine room that houses the mechanical systems that keep the home warm throughout the winter and provide fresh air in the warmer months.

      Our basement inspection thoroughly evaluates and inspects these mechanical systems, such as:

      • The Furnace: We inspect the furnace age, flame colour, filter cleanliness and vent pipes. We carefully inspect the furnace as an inefficient furnace can be a massive expense and a carbon monoxide safety hazard.
      • The Water Heater: We examine the water heater for signs of rust, active leaks, age, and proper temperature pressure relief valves. For example, water heater tanks typically have a lifespan of 8 to 12 years, and catching any red flags can help prevent damage or basement flooding.
      • The HRV & Ventilation: We review the cleanliness, operational controls and any other signs of wear on the HRV system. The Heat Recovery Ventilators (HRV) system keeps indoor humidity balanced, preventing winter window frost and stale basement air.

      4. Electrical & Plumbing Systems: Unfinished basements offer an incredible advantage during a home inspection, as they allow us to see the bare bones of the home’s plumbing and electrical routing before it is hidden behind drywall. Finished basements are also inspected during basement inspections for the following elements:

      • Plumbing Clues: We inspect any visible drain pipes, water lines, and the main water shut-off valve for slow drips, improper slopes, or outdated materials such as galvanized steel or water lines, which can impact insurance eligibility.
      • Electrical Hazards: Our team of professional home inspectors check the main breaker for proper labeling, safety issues, over-fused breakers or oversized fuses, as well as dangerous DIY wiring. In finished basements, we also test outlets to ensure that they are safely wired and grounded.

      Many homeowners choose to finish their basements to add living space, a home office, or a legal secondary suite. When we evaluate a finished basement, we look for critical safety and compliance markers:

      • Egress Windows: According to the Alberta Building Code, any basement rooms being used for sleeping must have at least one window that opens wide enough for an adult to easily escape during an emergency. Small windows do not count to abide by this code.
      • Vapour Barriers & Insulation: If parts of the basement are unfinished or accessible, we look to see if a proper plastic vapour barrier has been installed over the insulation. Incorrectly placed barriers trap moisture against the studs, potentially causing hidden rot.
      • Ceiling Height & Clearances: Habitable rooms require proper headroom, typically at least 1.95 meters in height. Lower ceilings can complicate legal basement suite permits or future resale value.

      Basement inspections as part of an overall home inspection should not be stressful or complicated experiences. If our team of professional home inspectors finds a crack, a leak, or a red flag, we not only note this, but we also try our best to explain the details in clear, easy to understand language. We work with buyers and sellers to help ensure that information regarding a basement inspection provides the necessary details to make an informed decision.

      How Sellers Can Prepare For a Basement Inspection

      If a seller is listing their home across Calgary and its neighbouring communities, there are a few proactive steps that can be taken to help ensure the basement inspection goes smoothly.

      • Clear Access Paths: Move storage boxes, fitness equipment, or seasonal gear away from the furnace, water heater, electrical panel, and the perimeter foundation walls. If we cannot see these key areas, we cannot inspect them.
      • Extend Your Downspouts: Ensure that your exterior eavestrough extends at least four to six feet away from the house. Proper exterior drainage solves a significant number of basement moisture concerns.
      • Replace The Furnace Filter: A clean furnace filter shows buyers that the property has been meticulously cared for and maintained.

      Buying or selling a home is a major milestone. Both buyers and sellers alike deserve an inspection report that reads less as a confusing textbook and more like a clear, actionable guide to the property. We take pride in delivering thorough, professional home inspections to proper complete peace of mind.

      What Home Inspectors Look For During Basement Inspections